BOTTOM OF FLOOR NOZZLE
1 Open the three locks on the bottom of
the floor nozzle. To open each lock, insert
the edge of a coin into the slot and turn
counterclockwise.
2
Lift tabs and pull up to expose the airway,
then tilt the nozzle neck back to straighten.
Use a flashlight to check for blockages in
the airway.
3 Remove any string, carpet fibers, or hair
that may be wrapped around the brushroll.
To loosen debris, run scissors along the
groove in the brushroll. To close the nozzle,
push down until it clicks into place, then
fasten the locks with a coin.
STEP 1
STEP 2
STEP 3
To Next Page
Loading...
Need help?
General
