USING YOUR VACUUM IN
UPRIGHT MODE
NOTE: The brushroll will spin
only when the vacuum cleaner
handle is tilted back.
1 Plug the power cord into an outlet. Place foot on floor nozzle
and tilt handle back.
2 Press POWER to turn on the vacuum.
3 To Clean Bare Floors or Area Rugs:
In HARD FLOOR mode, the brushroll and the Soft Roller
spin together slowly. The Soft Roller traps fine dust and
large particles, while the brushroll directs the debris into the
suction channel.
To Clean High Pile Carpets:
In CARPET mode, both brushrolls spin faster, working
together to pick up debris below the surface of your carpets.
4 The CARPET/HARD FLOOR button lets you control
brushroll speed by toggling from one mode to the other.
To increase brushroll speed to clean carpets, press the
CARPET/HARD FLOOR button so the green light is
illuminated. To clean bare floors with slower brushroll speed,
press the button again and the light will turn off.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets)
please select CARPET mode.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT ON THE NOZZLE
MEAN?
Solid Green
The brushroll is on and
working as it should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
To Next Page
Loading...
Need help?
General
