Shark IONFlex 2X DuoClean IF285 User Manual

QUICK
START
GUIDE
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.
IF285_QSG_REV_MP_180621
@sharkcleaning
MULTIFLEX STORAGEMULTIFLEX® REACH
EMPTYING THE DUST CUP
©2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. DUOCLEAN,
MULTIFLEX, SHARK ION, and SMART RESPONSE are trademarks of SharkNinja Operating LLC.
Press the MultiFLEX Lock Release
button and hold it down while folding
the handvac forward, until the
unit locks in storage mode.
To vacuum, press the MultiFLEX Lock
Release button while lifting up the
handvac, until the wand locks in place.
Press the MultiFLEX Lock Release
button to lower the angle of the wand
to increase your reach.
1. To empty dust
cup, first remove
the handvac from
the wand by
pressing the Wand
Release button
and pulling up on
the handvac.
2. Position dust cup
over a trash bin,
then open the
bottom of the dust
cup by pressing
the Dust Cup
Release button on
the side.
MultiFLEX
Lock Release
Carry Handle
Wand
Release
Wand Release
Button
Dust Cup
Release Button
IF285
Use this Quick Start Guide
to start using your new
vacuum’s great features.
For questions, visit us
online at sharkclean.com
Register your vacuum at
registeryourshark.com
CORD-FREE ULTRA-LIGHT
IONFLEX
™
2X

Shark IONFlex 2X DuoClean IF285 Specifications

General

Brand	Shark
Model	IONFlex 2X DuoClean IF285
Category	Vacuum Cleaner
Language	English

Summary

MULTIFLEX REACH

Adjust Wand Angle

Press the MultiFLEX Lock Release button to lower the wand angle for improved reach.

MULTIFLEX STORAGE

Fold for Storage

Hold the lock release while folding the handvac forward until it locks in storage mode.

EMPTYING THE DUST CUP

Remove Handvac from Wand

Press the Wand Release button and pull up on the handvac to detach it.

Open and Empty Dust Cup

Position dust cup over trash, then press release button on side to open and empty.

WHAT'S INSIDE

Included Components

List of vacuum parts and accessories included with the product.

ASSEMBLY

Vacuum Assembly Steps

Diagrams illustrating the process of assembling the vacuum cleaner components.

SMART RESPONSE TECHNOLOGY

Surface Settings

Select appropriate floor type settings for optimal cleaning performance.

ION POWER and ION BOOST

Understand ION POWER for everyday cleaning and ION BOOST for increased suction.

ION POWER PACK

Power Pack Usage

Indicators for charge levels (Full, Mid, Low, Nearly Empty, No Charge) during use.

Charging Indicator Lights

Explanation of battery indicator lights during the charging process.

VERSATILE CHARGING

Insert or Remove ION Power Pack

Instructions for easily inserting and removing the ION Power Pack from the vacuum.