Why are my floors cloudy after using Shark Steam Cleaner?
Cloudy, streaky, or spotty floors after steaming with your Shark Steam Cleaner can be due to residue from chemicals previously used on the floor. Ensure the cleaning pad is dry and correctly attached. It's also recommended to use distilled water, as hard water minerals can cause undesired results or damage.
Why is my Shark Steam Cleaner leaving water on the floor?
If your Shark Steam Cleaner leaves water on the floor or is hard to push, make sure the cleaning pad is fully soaked and properly attached to the mop head. If the pad is oversaturated, unplug the unit, wait 2 to 3 minutes for it to cool, and then replace it with a clean, dry mop pad.
General| Product Name | Shark Easy Spray SK140 |
|---|---|
| Category | Steam Cleaner |
| Type | Handheld Steam Cleaner |
| Power | 1050 W |
| Water Tank Capacity | 350 ml |
| Heat Up Time | 30 seconds |
| Steam Time | 15 minutes |
| Weight | 1.2 kg |
Basic safety precautions to follow when using the steam mop.
Warnings about steam, electrical shock, and cleaner handling.
Continuation of safety rules for operation and maintenance of the steam mop.
To Next Page