APPRENDRE A CONNAITRE VOTRE ASPIRATEUR
PORTATIF
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT FILTERS
for Model EP033
Filtre HEPAÉcran à débris
8
8
1. Appuyer pour ouvrir porte-poussière
2. Interrupteur
3. Trou de succion
4. Poignée
5. Bandoulière
6. Brosse
7. Brosse
8. Filtre Hepa de la
coupelle à poussière
9. Trou pour attacher bandoulière
10. Contenant pour poussières
11. Boyau flexible
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
FOR TECHNICAL SUPPORT
for Model EP033
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
or
visit our website: www.sharkvac.com
Please Note: The HEPA Dust Cup Filter may be washed. However, we
recommend that this NOT be done more frequently than once every three (3)
months.
To wash your HEPA Dust Cup Filter, hold filter cartridge by frame flange and rinse
under a tap until all observable dirt has been removed. Some discoloration of the
HEPA filter material may occur, this is normal and will not affect the filter’s
performance. When finished, shake off excess water. Do NOT wash in dishwasher.
It is important that when you wash the HEPA dust cup filter, you allow it to dry
COMPLETELY before using again. We recommend 24 hours to air dry. DO NOT
DRY IN DRYER.
Spécifications Technique
Voltage: 120V., 60Hz.
Puissance: 5.8 Amps, 700 Watts
9 6
To Next Page
Loading...
