What to do if the Shark ION RV750 '!' symbol is flashing?
If the '!' symbol is flashing on your Shark Vacuum Cleaner, it indicates a suction motor failure. To resolve this, remove any blockages, clean the filters, and ensure nothing is blocking the suction where the dust bin is located.
What does it mean if CLEAN is flashing blue on my Shark ION RV750?
If the CLEAN light is flashing blue on your Shark Vacuum Cleaner, the front wheel sensor, drop sensor, or bumper is reporting an error. First, move your robot to a new location on a level surface to ensure it can move freely. Also, check that the front bumper isn't stuck. If the CLEAN light continues to flash blue, remove the front wheel and clean the wheel cavity.
Why is the DOCK and SPOT lights flashing together on my Shark ION RV750 Vacuum Cleaner?
If the DOCK and SPOT lights are flashing together on your Shark Vacuum Cleaner, it means something is stuck in the main brushroll. Remove the obstruction to resolve the issue.
What to do if CLEAN is flashing red on my Shark ION RV750 Vacuum Cleaner?
If the CLEAN light is flashing red on your Shark Vacuum Cleaner, it indicates that the cliff sensors are reporting an error. Wipe the cliff sensors with a clean cloth. Also, ensure your robot is on a level surface with no obstructions, as the robot cannot start due to this error.
What to do if the SPOT light is flashing blue on my Shark ION RV750 Vacuum Cleaner?
If the SPOT light is flashing blue on your Shark Vacuum Cleaner, it means the unit cannot move due to the surface or an obstruction. Move the robot to a new location to resolve this issue.
Why are the DOCK and SPOT lights alternating flashing on my Shark ION RV750?
If the DOCK and SPOT lights are alternating flashing on your Shark Vacuum Cleaner, a side brush is stuck. Remove any debris from the side brushes.
What does it mean if the CLEAN light is solid red on my Shark ION RV750 Vacuum Cleaner?
If the CLEAN light is solid red on your Shark Vacuum Cleaner, it means the dust bin has been removed and needs to be reinserted.
What does it mean if the CLEAN light is solid blue on my Shark ION RV750?
If the CLEAN light is solid blue on your Shark Vacuum Cleaner, your robot is in sleep mode. Press any button on the robot or remote to start it again.
Why is the red 'Replace' LED light on my Shark ION RV750?
Your battery is ready to be replaced. Visit sharkclean.com for replacement.
What to do if all LED lights are off on my Shark ION RV750?
If all the LED lights are off on your Shark Vacuum Cleaner, the unit is turned off. Cycle the power switch. If there's no response, plug it in to charge.
General| Style | robotic vacuums |
|---|---|
| Color | smoke/ash, gray |
| Floor Type | all floors |
| Dust Bin Capacity | 0.11 gallons |
| Filter | other |
| Washable Filter | no |
| Pet Mode | yes |
| Bagless | yes |
| Wet And Dry Cleaning | no |
| ?leaning Area | 5.9 inches |
| Cleaning Mop | no |
| Brushes and Accessories | side brush (2x) |
| Edge Cleaning | yes |
| Cliff Sensor | yes |
| Self-Emptying | no |
| Room-by-Room Navigation | no |
| Connectivity | wi-fi |
| Remote Control | yes |
| Smart Applications | amazon alexa, google assistant, true |
| Voltage | 14.4 volts |
| Current | 1.8 amperes |
| Battery Life | 90 minutes |
| Battery Charging Time | 180 minutes |
Weight and Dimensions| Length | 12.4 inches |
|---|---|
| Height | 3.54 inches |
| Width | 12.6 inches |
| Net Weight | 6.6 pounds |
To Next Page
