Shark IQROBOT RV1000 User Manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your robot.
As your robot learns your home, you may need to make some small adjustments to optimize performance.
AVOID MOVING THE ROBOT OR DOCK
LIGHTING CONDITIONS
EMPTYING THE DUST BIN
DOORWAYS AND THRESHOLDS
Clean Dock
!
WHAT TO EXPECT
While your robot is cleaning, do not pick it up and
move it, or move the charging dock—this could
impact the robot’s ability to map your home.
Run your robot in well-lit conditions. If you are
running your robot at night, make sure to turn on
the lights.
During the first few weeks of use, the dust bin will
need to be emptied frequently. Empty debris and
dust into trash.
Look between the filter and plastic shield and make
sure there is no debris buildup.
Your robot can easily climb over most common
thresholds. However, in some situations they may
present a challenge. Use BotBoundary® strips to
block o these areas.
INTERACTIVE MAP
SCHEDULING
Depending on your home layout, your robot may
take several runs to build a complete map.
For a constant state of clean, set up a cleaning
schedule in the app.
© 2019 SharkNinja Operating LLC. BOTBOUNDARY and SHARK are registered trademarks of
SharkNinja Operating LLC. IQ NAV, SHARK IQ ROBOT is a trademark of SharkNinja Operating LLC.
RV1000_QSG_E_MP_Mv19
QUICK START GUIDE
To stay current on our latest updates and features,
DOWNLOAD THE SHARKCLEAN APP.
Search “SharkClean” in the app store.

Shark IQROBOT RV1000 Specifications

General

Type	Robot Vacuum
Manufacturer	Shark
Model Number	RV1000
Battery Life	Up to 90 minutes
Battery Type	Lithium-Ion
Wi-Fi Connectivity	Yes
App Control	Yes
Brushroll Type	Self-Cleaning Brushroll
Cliff Sensors	Yes
Filter Type	HEPA
Self-Emptying	Yes
Voice Control	Yes
Included Accessories	Filter, Side Brushes

Summary

What to Expect

Interactive Map

Robot learns home layout, may take runs to build map.

Scheduling

Set up a cleaning schedule in the app for a constant state of clean.

Avoid Moving Robot or Dock

Do not pick up or move robot/dock during cleaning to ensure proper mapping.

Lighting Conditions

Run robot in well-lit conditions; turn on lights if running at night.

Doorways and Thresholds

Robot climbs common thresholds; use BotBoundary strips for challenges.

Setup

Prepare the Robot

Remove protective film, attach side brushes, and power on the robot.

Set Up the Dock

Find a permanent location for the dock with a strong Wi-Fi signal.

Charge the Robot

Place robot on dock to charge; indicator light shows status.

Connecting the SharkClean App and Robot

Download and Create Account

Search "SharkClean" app, download, and set up your account.

Activate Robot Wi-Fi

Hold Dock and Clean buttons until Wi-Fi light blinks.

Select Robot (Apple iOS Only)

For iOS, exit app, go to Wi-Fi settings, select robot, return to app.

Connect to Home Wi-Fi

Select your home Wi-Fi network and enter your password.

Connection Success

Screen confirms successful connection; proceed to next steps.

Optimizing Your Home for Cleaning

Prepare Your Home

Clear cords, small objects, and open interior doors for cleaning.

Set Up for Success

Use BotBoundary strips to block off areas like power cords or high thresholds.