EasyManua.ls Logo

Shark IZ300 Series User Manual

Shark IZ300 Series
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Troubleshooting Guide for Shark's IZ300/IZ320 Series
The soft roller has stopped spinning?
Turn vacuum off and remove floor nozzle from wand.
Remove soft roller using eject tab on left side of nozzle
Turn the nozzle over, clear away all debris from both rollers, the brushroll chamber and endcaps.
Inspect ends of the soft roller for any signs of wear.
Does the soft roller spin along with the main roller?
Reassemble the vacuum and turn it on.
Is the Suction (Pod/Handvac) Motor on?
Turn vacuum off and remove floor nozzle from wand.
Remove soft roller using eject tab on left side of nozzle
Question and Answer IconNeed help?

Do you have a question about the Shark IZ300 Series and is the answer not in the manual?

Shark IZ300 Series Specifications

General IconGeneral
TypeCordless Stick Vacuum
BatteryLithium-Ion
Run TimeUp to 60 minutes
Dust Cup Capacity0.7 Quarts
HEPA FilterYes
LED HeadlightsYes
Battery Voltage25.2V
Self-Cleaning BrushrollYes
FlexologyYes
Charging Time3.5 hours
FiltrationHEPA
ConvertibleYes
Attachmentscrevice tool
Warranty5 years

Summary

Troubleshooting Soft Roller Issues

Soft Roller Not Spinning

Steps to address the soft roller stopping its rotation, including removal and cleaning.

Troubleshooting Suction and Noise

Low or No Suction

Guidance for restoring vacuum suction, including using boost mode and selecting power settings.

Vacuum is Noisier Than Expected

Explains potential causes for increased noise and suggests diagnostic steps.

Vacuum Performance and Smells

Vacuum Smells Like Burning

Procedures to identify and resolve burning odors from the vacuum components.

Shorter Than Expected Run Time

Advice on maximizing battery life, charging, and understanding runtime factors with battery data.

Clearing Blockages

Wand and Nozzle Blockage Check

Instructions for detecting and clearing obstructions within the vacuum's wand and nozzle.

Cleaning and Filter Maintenance

Brushroll and Soft Roller Cleaning

Steps for accessing, cleaning, and maintaining the brushroll and soft roller assemblies.

Filter Cleaning and Maintenance

Guide to removing, cleaning, and reinstalling pre-motor and post-motor filters.

Power Issues and Charging Indicators

No Power or Intermittent Power

Troubleshooting steps for when the vacuum unit fails to power on or has inconsistent power.

Understanding Charging Lights

Explains the various LED patterns indicating different stages of battery charging.

No Power Digital Screen Errors

Advice for addressing 'no power' issues related to digital screen errors.

Related product manuals