sharkclean.com sharkclean.com
1. Place the Pod onto the Floor Nozzle post.
2. Insert the Wand into the pod.
3. Insert the Handle into the top of the wand.
4. Insert the Hose into the Hose Holder on the back of pod.
5. Insert the accessories into the Accessory Clips on the back of the pod.
6. Secure the hose by pressing the knob on the Hose Clip into the socket on the back of the pod.
For proper operation, ensure all parts are firmly clicked into place.
(Click)
(Click)
2
1
(Click)
(Click)
3
4
5
6
(Click)
(Click)
ASSEMBLY ASSEMBLY
To Next Page
Loading...
