Shark Rotator Pet Plus - Assembly Instructions

sharkclean.comsharkclean.com
ASSEMBLY ASSEMBLY
1. Insert wand into pod.
2. Insert handle into wand.
3. Attach hose to back of vacuum pod.
4. Attach hose to clip on wand.
5. Insert C-shaped clip onto base of vacuum pod and remove tape.
6. Store accessories on tool storage posts.
For proper operation, ensure all parts are firmly clicked into place.
(Click)
1
(Click)
2
(Click)
3
(Click)
4
6
Tool Storage Posts
Upper Cord Hook
Cord Clip
POWER CORD
For cord access, rotate upper hook down
and remove cord.
Use cord clip located on the side of wand to
hold cord in place while vacuuming.
UPPER CORD HOOK CORD CLIP
(Click)
5