9 1-800-798-7398
USING YOUR STEAM MOP - CONT.
1 Pull and twist the quick release cord holder to
unwrap the power cord completely. When Steam
Mop is plugged into an electrical outlet, the power
light will illuminate. It takes approximately 30
seconds for the mop to heat up and the steam to
be ready.
2 Pump the handle a few times in a downward
motion. This pumping action will release steam as
you mop and allows you to customize the amount
of steam you want. Begin mopping with a forward
and backward motion. The natural motion of
mopping will produce steam.