12sharkclean.com
MAINTAINING YOUR STEAM MOP
AFTER USE AND STORAGE
1 Unplug the cord from the wall outlet, and wrap
the cord around the cord hooks. Lock the Steam
Mop in an upright standing position by raising
the handle until the pole is standing straight up,
perpendicular to the ground.
2 After cleaning, wait 2 to 3 minutes to let the
Dirt Grip® pad cool before touching it. When cool,
remove pad from mop head to avoid damage to
your floors. Remove the pad by stepping on the tab
and lifting o the mop head, or by carefully pulling
the pad o the mop head.
3 With the unit locked in the upright standing
position, store it in a closet or the corner of a room.
WARNING: To reduce
the risk of shock and
unintended operation,
unplug unit before
servicing.
To Next Page
Loading...
Need help?
General
