Shark S1000 Series User Manual

7 1-800-798-7398
USING YOUR STEAM MOP
1 To remove the tank, lift
it up and away from
the Steam Mop body.
Make sure to unplug
the Steam Mop before
removing the water
tank.
2 To remove the water
tank cap, twist
counterclockwise. Fill
tank completely with
distilled water or tap
water.
CAUTION: DO NOT
scrub any one area for
an extended period.
IMPORTANT: Before
you fill up the water
tank, make sure
your Steam Mop is
unplugged from the
electrical outlet.
IMPORTANT: Make
sure you DO NOT use
the Shark
®
Steam Mop
without first attaching
a Dirt Grip® pad and
filling the tank with
water.
NOTE: To prolong the life
of your Steam Mop, we
recommend using distilled
water.
NOTE: Sweep or vacuum
your floors prior to
cleaning with your Steam
Mop.
NOTE: Please wait 2 to
3 minutes for the Steam
Mop to cool o before
removing the Dirt Grip
pad. NEVER leave the
Steam Mop with a damp
or wet Dirt Grip pad on
any floor for an extended
period.
STEP 1 STEP 2

Shark S1000 Series Specifications

General

Brand	Shark
Model	S1000 Series
Category	Steam Cleaner
Language	English