10sharkclean.com
3 When the water tank is empty, the Steam Mop will stop producing steam. Make
sure to unplug the Steam Mop before refilling the water tank. Follow the water
tank refilling instructions on pages 7-8.
TO SANITIZE* WITH YOUR STEAM MOP
1 Start with a clean pad.
2 Pump the handle a few times in a downward motion.
3 Start mopping on an appropriate sealed hard-floor surface with a forward and
backward motion. After three minutes, your unit is ready to be used to sanitize.
4 Using a forward and backward motion, move the unit over the area you seek to
sanitize. Repeat at least 15 times.
*Sanitization studies were conducted under controlled test conditions. Household
conditions and results may vary.
To Next Page
Loading...
Need help?
General
