Shark S1000UK User Manual

7 8
0800 862 0453 sharkclean.eu
USING YOUR STEAM MOP
1 To remove the tank,
lift it up and away
from the Steam Mop
body. Make sure to
unplug the Steam Mop
before removing the
water tank.
2 To remove the water
tank cap, twist
counterclockwise. Fill
tank completely with
distilled water or
tap water.
3 Replace cap on water tank and turn
cap clockwise to seal.
4 To replace the water tank, align it so
the cap faces down. Place the cap
into the hole in the Steam Mop body
and slide tank down until it clicks
securely into place.
IMPORTANT: DO NOT
scrub any one area for
an extended period
of time.
IMPORTANT: Before
you fill up the tank,
make sure your Steam
Mop is unplugged from
the electrical socket.
IMPORTANT: Make
sure you DO NOT
use the Steam Mop
without first attaching
a Dirt Grip
™
pad and
filling the tank
with water.
NOTE: To prolong the
life of your Steam Mop,
we recommend using
distilled water.
N O T E : Sweep or vacuum
your floors prior to
cleaning with your
Steam Mop.
NOTE: Please wait 2 to
3 minutes for the Steam
Mop to cool o before
removing the Dirt Grip
pad. NEVER leave the
Steam Mop with a damp
or wet Dirt Grip pad on
any floor for an extended
period of time.
STEP 1 STEP 2 STEP 4STEP 3

Shark S1000UK Specifications

General

Type	Portable steam cleaner
Capacity	0.375 L
Cord length	5.5 m
Product color	Green, White
Removable portable steam cleaner	Yes
Ready time	15 min
Steam pressure	- bar
Adjustable steam	-
Cleaning surfaces	Hard floor

Weight and Dimensions

Depth	160 mm
Width	310 mm
Height	1170 mm
Weight	1800 g