3
English
www.sharkclean.com
IMPORTANT: Always make sure
the mop is UNPLUGGED from the
wall when not in use. Never fill the
mop, attach the mop head, change
or remove the micro-fiber cleaning
pad while the mop is plugged into
the wall. To prolong the life of
your Shark
®
Lift-Away
™
Pro Steam
Pocket
®
Mop we recommend using
distilled water. Make sure you only
add water to the tank. Chemicals or
cleaning solution may damage the
appliance and could be unsafe for
you and your family.
STEAM MOP ASSEMBLY
1 Insert the Mop Handle end labeled
“Front” into the Steam Mop Housing.
Make sure it is inserted past the
line printed on the pole. Secure the
assembled handle and pole by using
the large screw and a Phillips or a flat
head screw driver (screwdriver not
included). (fig. 1)
Getting Started with Your Steam Mop
fig. 1
To Next Page
Loading...
