To Next PageTo Next PageWhat causes excessive vibration in the delivery line of my Shark SGP-353037 Pressure Washer?
Excessive vibration in the delivery line of your Shark Pressure Washer is caused by valves functioning irregularly. Check and replace if necessary.
What causes presence of water in oil in my Shark SGP-353037?
The presence of water in the oil of your Shark Pressure Washer can be due to a worn oil seal (check and replace if necessary), high air humidity (check and change oil twice as often), or worn or bad packing (check and replace if necessary).
Why won't the burner motor run on my Shark Pressure Washer?
If the burner motor won't run on your Shark Pressure Washer, it could be due to a seized fuel pump (replace the fuel pump), a loose or misaligned burner fan (position correctly and tighten the set screw), a defective control switch (replace the switch), a loose wire (check and replace or tighten the wiring), or a defective burner motor (replace the motor).
General| Brand | Shark |
|---|---|
| Model | SGP-353037 |
| Category | Pressure Washer |
| Language | English |
Machine exceeds 85 dB, requiring ear protection.
High-pressure spray hazards require eye, hand, and foot protection.
Read manual, know controls, stay alert, avoid electrical hazards.
Precautions for refueling and operating near flammable materials.
Warnings about hot surfaces and the need to protect the machine from freezing.
Warning about hot discharge fluid and avoiding contact.
Caution regarding ladder use and operating on inclines.
Guidelines on avoiding acids, running dry, hose protection, and fatigue.
Steps for connecting the high-pressure hose, spray gun, and nozzles.
Connecting the garden hose to the cold water source and pump inlet.
Instructions for checking engine oil and filling the gas tank.
Connecting water and bleeding air from the system.
Steps for setting the fuel valve and choke for starting.
Turning the engine to run, pulling the starter grip, and adjusting choke.
Adjusting temperature and activating the burner for hot water.
Guide to different color-coded nozzles for various spray patterns.
Explanation of the pump protector mechanism and its function.
Procedures for cleaning surfaces and recommendations for best results.
How to apply detergent and rinse the cleaned surface.
Steps for safely shutting down the pressure washer and releasing pressure.
Guidelines for storing the machine to prevent damage, especially from freezing.
Procedures for engine maintenance before extended storage.
Possible causes and solutions for low pressure.
Troubleshooting steps for when the burner fails to light.
Causes and solutions for the machine smoking.
Issues related to the detergent not being drawn properly.
Troubleshooting for pump running issues, noise, and vibration.
