Shark UV410 - Cleaning with Vacuum Accessories; Using the Super Stretch Hose; Using the Cleaning Wand

7
www.sharkclean.com
Cleaning with the Vacuum Accessories
Before cleaning with your
accessories:
Stand vacuum into upright position.
Secure Super
Stretch Hose in
the anti-tip hose
hook to prevent
tipping.
Select the “I" - On position for
suction only cleaning.
DO NOT pull vacuum cleaner
around by the hose.
DO NOT overextend the hose.
Vacuum Accessories
Your vacuum comes with a Super
Stretch Hose and Cleaning Wand.
Use one or the other to attach your
cleaning accessories.
1 Using the Super Stretch Hose:
Stand the vacuum into upright
position.
Remove the hose from the
Cleaning Wand.
Push the selected tool into the
hose connector.
1
3
4
5
6
2
3
4
5
6
2 Using the Cleaning Wand:
Stand the vacuum into upright
position.
Remove the Cleaning Wand
(with hose attached) from the
unit.
Push the selected tool into the
end of the Cleaning Wand.
3 Pet Hair Power Brush
4 Dusting Brush
5 Crevice Tool
6 24” Crevice Tool
Extended Reach Cleaning Kit
Includes an extra Cleaning Wand and
extra Super Stretch Hose.
Increases your cleaning
reach to over 27 feet!
To order additional parts and accessories,
go to www.sharkclean.com or call
1-800-798-7398.
Extended Reach
Cleaning Kit
UV410_26_IB_ENG_120229_5.indd 7 12-02-29 1:30 PM