Sharp 21E-FG1F User Manual

E 22
Dimension: 176 x 250 mm
M&M Printers (M) Sdn. Bhd
21E-FG1F_17-23E
ENGLISH
On timer
Automatically turns power on after a set length of time has
passed.
MENU
SOUND
FEATURE
PICTURE
TIMER
CH-SETTING
TIMER
OFF --:--
--
--
ON 8:00
--:--
POSITION
VOLUME
TIMER
OFF --:--
ON 8:00
CH28
--:--
--
POSITION
VOLUME
8 Press
CH
/
CH
to
select “VOLUME”.
9 Press / to
set volume.
10 Press
MENU
until normal
screen appears.
11 Press to put TV set into
Standby mode.
• Power indicator will flash to indicate On Timer is set.
• When the preset length of time (in the above example, eight hours)
has passed, the power turns on and a picture appears on the screen.
• The ON TIMER speaker volume gradually increases from zero to
preset volume.
1 Press
MENU
to call MENU
screen.
2 Press
CH
/
CH
to
select “TIMER ”.
TV Set
Power indicator (Flashing)
• To cancel the timer setting, press
NORMAL
when “ ” is displayed on the left of “ON ” so as to set the
timer to “- - : - -”.
• The timer can be set in ten-minute intervals.
• The On Timer is cancelled if the power is turned off using
POWER
.
• If the TV set is turned on by the On Timer, then the TV set will be automatically turned off in two hours if
no buttons are pressed on the TV set or remote control.
6 Press
CH
/
CH
to
select “POSITION”.
7 Press / to set
the channel.
TIMER
OFF --:--
ON 8:00
CH28
--:--
20
POSITION
VOLUME
MENU
:ADJUST :RETURN
:SELECT
CH
TV
TV/VIDEO
4
7
2
8
3
6
9
0
NORMALSURROUND
LANGUAGE
CH
CH
MENU
1
5
CH
CH
MENU
NORMAL
5 Press / to set
time for TV to turn on.
• Maximum time that can be preset is
12 hours and 50 minutes.
• As soon as the time is entered, the
timer starts to count down.
TIMER
OFF --:--
ON --:--
--:--
POSITION
VOLUME
3 Press / to
display TIMER menu.
4 Press
CH
/
CH
to
select “ON
”.

Sharp 21E-FG1F Specifications

General

Brand	Sharp
Model	21E-FG1F
Category	TV
Language	English