[] CHANNELSTRENGTH
Makesurethesignalstrengthofeachchannelreceivedis finelyadjusted.
(i) PressCH,&/_' to select "CHANNEL STRENGTH".
(ii) Input channel number (2-69) using REMOTE KEYPAD
(0-9) button.
(iii) Adjust the direction of the antenna to obtain the signal
strength level 60 or higher.
QOO
QO@
C)®Q
o This function is available for DIGITAL channel only,
MENU
6 Press MENU to exit. O
. If you misplaced your Remote Control you can still access most settings (On the Set)
via the MAIN MENU screen by pressing MENU on the TV set. MENU
o Some features of your TV set are not accessible without the Remote ,_
Control. If you lost your Remote Control, contact a Sharp Service Center
y,
for a replacement,
MENU
G
I
To display receiving channel information,
Press DISPLAY once. The display appears as shown on right°
o If the viewing channel is a digital channel, the information of channel number, audio service type,
broadcast station, program information and V-Chip rating wilt appear°
i? DIGITAL
DISPLAY
Q
(whiteviewingdigitatchannel)
10
ANALCG
4:) TV PG D!SV
OSIEREO eOR AiR
SAP *'Ot_A_R
'whileviewinganalogchannel)
2 Press DISPLAY twice. The timer information screen will appear,
O_SPLAY
Q
SLEEP TIMER
t2_ RE_,_AIN
VI_VING TIME
IOH 00_ RE}_AIR
OISPLAY
3 Press DISPLAY again to return to normal screen, O
11
To Next Page
Loading...
Need help?
General
