Sharp 32SC26B User Manual

@
Please note: your new Television is capable of receiving the full
range of AIR-TV channels available today, from the most advanced
digital channels, to the more traditional analog channels° As the
transition toward full digitalTV continues, some AIR-TV systems
in the USA wilt have a mixture of analog and digital channels in
their lineups.
[] You can change channels in several ways.
G>OGb
OQO
QQO
M_J_U
O--
VOLUIvlE
(+)t(- 1
CHANNEL
uP(A}I
DOWN(v)
- MENU
Method 1 (On the Set)
MENU
Using CH A/_' on the remote
control unit or on the TV set, (_
MENU
button
(whileviewing
digitalchannel)
10
AtIA£¢G
4:_ TV PG DLSV
QSTEREO _,ON A_R
SAP _-OR AiR
MO_O
_hile viewinganalogchannel)
Method 2
FLASHBACK
(i) Press FLASHBACK to switch to the previously tuned channel. @
(ii) Press FLASHBACK again to switch back to the currently tuned channel.
o FLASHBACK will not work if no channel has been changed after TV is turned on
Method 3
Using REMOTE KEYPAD buttons (0-9 and ENTER) to select up to I25 channels for VHF/UHF/
CATV.
To select a 1 or 2-digit analog channel number (e. g., Channel 5): @ O
51 a1
QOQ
Press 5 -_ ENTER
o When selecting a 1-digit channel number, it is not necessary to press 0 before the number
o When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds
To select a 3-digit analog channel number (e. g., Channel 115):
Press 1 -_ 1 -_ 5 -_ ENTER
111 I15]
= When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds.
, If you push "0" by itself, nothing wilt happen.
To select a digital channel number (e. g. Channel 10.1):
10 101 101]
Press I -_ 0 -_ • (DOT) --) 1 -e ENTER
o Complete the above steps within a few seconds.
When you enter 0-9 and o (DOT), channel selection will be made if there is no operation for a few
seconds
12

Sharp 32SC26B Specifications

General

Brand	Sharp
Model	32SC26B
Category	TV
Language	English