Sharp 4T-C70AH1X - Power Consumption; Software Version; Writing the Panel Size

4T-C6070AH1X
5 – 5
4. Writing the Panel size.
1) Enter the adjustment process mode [ PAGE 2/13 (INIT) ]
2) Point the cursor to [PANEL SETTING]
3) Select Panel Size and press [enter] key
02/11 [INIT]
FACTORY INIT
GENERAL :
PANEL SETTING
PUBLIC MODE OFF
OPERATION ACUTIME 0008H 56M
RESET OFF
5. POWER CONSUMPTION
Power Consumption Measurement Method
① Aging time : minimum 30 minutes
② Signal : Color Bar
③ Audio frequency : 400 Hz
④ AV Mode : Dynamic
⑤ Picture Setting : Backlight/ Brightness/ Contrast : MAX;
⑥ Audio Output (400 Hz) : 1/8 of Maximum Audio Output (10W + 10W) ;
VOL = 29
⑦ AC Input: 99VAC ~ 264VAC 50Hz
⑧ Wake UP LAN : Off
Model
4T-C60AH1X
Power Consumption
Specification (IEC600657)
Standard
Value
Limit
Value
Power Consumption 185 W +10%
Power Consumption at
Stand-by Operating
0.6 W 0.6W
6. SOFTWARE VERSION
Confirmation on Software version will be done during meeting.
Model Software Package
4T-C60AH1X Fox2_Asia_Pack02_XXXX.IMG
Main Software Filename : XXXX is Software version
If any changes of software, will be informed by MARUHEN