To Next PageTo Next Page
Need help?Do you have a question about the Sharp 4T-C60AH1X and is the answer not in the manual?
Service work should be performed only by qualified service technicians.
Explains the LF symbol indicating lead-free solder on PWBs and manuals.
Guidance on using lead-free wire solder for repairs and potential damage.
Advises on soldering techniques, bit care, and cleaning for lead-free solder.
Lists major service parts for 4T-C60AH1X and 4T-C70AH1X models.
Provides detailed specifications for LCD panel, resolution, TV function, audio, terminals, and power.
Details the procedure for attaching the stand unit to the TV.
Presents dimensional drawings for 4T-C60AH1X and 4T-C70AH1X models.
Outlines steps for entering, canceling, and operating the adjustment mode.
Guides on how to upgrade TV software using a USB device.
Details data input for Main MICON/Monitor MICON software.
Describes procedures for white balance and gamma adjustment.
Details input for MAC Address, Widevine, HDCP, and Receiver ID.
Procedure to enter adjustment mode and set panel size.
Explains the method for measuring and confirming power consumption.
Outlines the procedure for exiting factory setting and initializations.
Reiteration of MICON software data input.
Describes the procedure for VCOM adjustment.
Detailed procedure for white balance adjustment.
Reiteration of KEY DATA INPUT procedures.
Procedure to enter adjustment mode and set panel size.
Explains the method for measuring and confirming power consumption.
Explains three methods to start the Public Mode setup screen.
Details how to exit Public Mode and its implications.
Describes initialization values for public setting.
Procedure for navigating and setting options in Public Mode menu.
Adjustment range and behavior of maximum volume settings.
Options and behavior for fixing volume levels.
Determines the fixed volume level for specific settings.
Controls remote control button functionality.
Configuration for panel button response.
Configuration for the menu button response.
Setting to fix or vary AV position.
Controls whether the On Screen Display is active.
Sets the initial input source or channel upon power-on.
Fixes the input mode to prevent switching.
Enables/disables power-on via 232C command.
Imports pictures from USB to TV flash memory.
Configures the display time of the startup screen.
Controls output of remote control signals to RS232C.
Enables or disables the Public Mode setting menu.
Clears private user data to default settings.
Provides a table to diagnose and resolve power and startup issues.
Troubleshooting steps for no video with RF signal input.
Troubleshooting steps for no video with external video input.
Troubleshooting steps for no video with Component input.
Troubleshooting steps for no video with HDMI input.
Troubleshooting steps for no audio output.
Presents the main schematic diagram of the TV circuit.
Provides a system block diagram showing major components and connections.
Lists printed wiring board assemblies for the models.
Lists LCD panel module units for the models.
Lists components of the main unit.
Lists cabinet and mechanical parts for 4T-C60AH1X.
Lists cabinet and mechanical parts for 4T-C70AH1X.
Lists supplied accessories for 4T-C60AH1X.
Lists supplied accessories for 4T-C70AH1X.
Lists packing parts not for replacement for 4T-C60AH1X.
Lists packing parts not for replacement for 4T-C70AH1X.
Illustrates the packing assembly for 4T-C60AH1X.
Illustrates the packing assembly for 70AH1X.
Shows images and names of supplied accessories.
General
