Sharp 4T-C60AH1X - 16. RC PATH THROUGH; RC Path Through Setting; 17. PUBLIC MODE; Public Mode Setting Menu

4T-C6070AH1X
5 – 18
16.RC PATH THROUGH
17.PUBLIC MODE
Selection
Default
Explanation
Limit in setting
Exception
Remarks
“ Fixed ”, On : “ TV RCE “ ( loop enabled )
O
The from decide whether the signal received by remote control’s light-receiving section is output to
the blankpin ( 9 pin ) of RS232C
Fixed
On : TV RCE
On : TV RCD
: This function is not active.
: This function is active, and remote is active, too
: This function is active is active, and remote is not active.
When set to “ On : TV RCD”, TV does not accept the remote control.
None
Selection
Default
Explanation
Exception
Limit in setting
Remarks
“ O and On ” ( loop enabled )
O
The item decide whether Public mode setting menu are enabled or disabled.
The same item as [ PUBLIC MODE ] in the adjustment process menu.
OFF
ON
: Public mode us not active
: Publuc mode not active
None
None
Each operation of the Public mode is impossible unless this item is set to ON.