Sharp 5P-27G - Antenna Adjustment; Radio Reception Tuning; Removable Sunshield; Sunshield Panel Care

12 Mixing Operation
1.
MIXED
REPRODUCING
=
Using
External
Microphone
as
Loudspeaker
aa
we
Set the Mode selector (Mode) at T
ape
position.
MIXING eae oo
SELECTOR MONITOR!
au nace MIXING SWITCH Me oge. BY:
THROUGH:
TV or RADIO ExT MIKE | 2Y PLAYBACK
RADIO
—+ + SPEAKER
HEADPHONE
TAPE EXT MIKE TAPE PLAYBACK
EARPHONE
TV
WIRELESS MIKE | EXT MIKE RADIO PLAYBACK
Plug the external microphone into the micro-
phone jack (MIC).
2. MIXED RECORDING
MIXING aia
SELECTOR MONITORING
mixinc | switcH | RECORDER BY:
SOURCES MODE :
THROUGH:
Push the play key ( » Play).
Review Cu————]
ve
Beit m Play atop sEwet Pauw
SPEAKER/HEAD-
TV
or
RADIO
EXT
MIKE
PHONE/EARPHONE
RECORD/
PLAYER EXT MIKE RECORD
SOCKET (DIN) Turn the mixing balance control (Mix.
Balance) fully clockwise.
BUILT-IN MIKE | EXT MIKE RECORD
@ It is noted that if the microphone is brought too near the speaker, the
resultant sound will cause howling: in this case, make the microphone be olume Adjust the volume, bass and treble controls.
away from the speaker or decrease the volume.
@ Mixing Balance Control:
This knob is useful for adjusting the balance of source's
volume and microphone’s sound, thereby allowing pleasure
of mixing. Turn the knob to the left or right to your listen-
ing taste. (With the connector plugged in the DIN socket,
the output of source is kept constant, and this knob permits
adjustment of microphone output only.)
Mixing Balance
aa
&
16