29
70GS-64S
STEREO LED FLASHING CODES.
If the TV set does not work and the stereo led is flashing, follow the sequence according to the information below, as
a guide to fault finding.
1. Unable to read or write into NVM: 66% ON, 33% OFF twice and OFF for a second.
2. MSP failure: 66% ON, 33% OFF for three times and OFF for a second.
3. VPC failure: 66% ON, 33% OFF for four times and OFF for a second.
4. SAA4956 failure: 66% ON, 33% OFF for six times and OFF for a second.
5. DDP failure: 66% ON, 33% OFF for seven times and OFF for a second.
On Off
On Off
On Off
To Next Page
Loading...
