Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
1. Connecting the Monitor
and PC
3. Settings to operate the
Monitor
4. Command list
7. Troubleshooting
8. Specifications, etc.
Ver. 1.00
＞
＜
Operating the Monitor Using a PC (IP control)
Command and argumen
• In the "B" part field, characters should be
entered left-aligned, and fill the rest of the
field length with spaces. (Must be 4
characters.) If it is outside the settable range,
"ERR" is returned.
• Any argument shown as "-" in the command
list on pages 6-4 to 6-7 can take on any one
of the followings:"0" to "9", "-" (minus), space
or "?"
• Certain commands return the currently set
value whenever "?" is assigned to their
arguments.
Connecting the Monitor and PC
6-2
4/8/2020 Sharp operation manual
To Next Page
Loading...
