Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
1. If You Suspect a
Problem
9. If Error Message
Appears
11. What If
8. Specifications, etc.
Ver. 1.00
＞
＜
Troubleshooting
If You Suspect a Problem
General
What if Where to check Reference page
You cannot operate the buttons on the remote
control or Monitor
It may be attributable to external or interference noises. Turn off the Monitor with its power button, leave it alone for about a
minute after unplugging the power plug, and then plug the power plug back in again to turn its power on.
―
Isn't the RC control lock set to Lock? 3-27
You hear a crack sometimes It is a sound of the cabinet slightly expanding or contracting with changes in temperature. It has no impact on performance, etc. ―
7-6
4/8/2020 Sharp operation manual
To Next Page
Loading...
Need help?
General
