Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
1. If You Suspect a
Problem
9. If Error Message
Appears
11. What If
8. Specifications, etc.
Ver. 1.00
＞
＜
Troubleshooting
If You Suspect a Problem
General
What if Where to check Reference page
Input change does not allow selection Is the input skip set to "No"? 3-37
The power turns off automatically Check if the Monitor is in the mode where it is turned off automatically. ―
8K inpu
What if Where to check Reference page
Not shown as 4320p
Check if four HDMI cables are inserted into A to D of INPUT 7.
Check the resolution of the output device.
5-1 to 5-3
No video appears Any connections to HDMI 1 to 4? 5-1 to 5-2
No sound is coming out
Go to "INPUT7 audio setting" where you should select the audio input terminal used. The
compatible format is Linear PCM only.
5-4
If any problem persists after you try the corresponding solution above, be sure to unplug the power plug and then contact your local distributor
7-7
4/8/2020 Sharp operation manual
To Next Page
Loading...
Need help?
General
