Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
1. Connecting 8K Output-
compatible
Device/Quad-screen
display（4K or less)
5. Connecting 4K Output-
compatible Device
7. Viewing HDR Video
(INPUT1, INPUT7,
INPUT8)
9. Using the HDMI CEC
11. Connecting Recorder,
Player, etc.
21. Connecting Audio
Device
22. Connecting PC
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
＞
＜
Connecting Other Devices
Viewing HDR Video (INPUT1, INPUT7, INPUT8)
• This Monitor provides support for HDR (High Dynamic Range) supported by “ULTRA HD Blu-ray
TM
".
Ever-more brightness information is included on HDR video, making it possible to express the gradation of bright and
dark areas in the HDR video. This was previously impossible to express in videos such as ones with a high contrast
between bright and dark areas, and thereby offering high-contrast, realistic video images.
• To view a HDR video using INPUT 1 of the Monitor, connect a HDR-capable device to INPUT 1, and set "Suitable
mode for signals" to "Full mode (HDR)".
• When INPUT7 or 8 is selected, you can use a HDR compatible device with the default setting.
1. Press INPUT, use the
/ to select "INPUT 1", and then press ENTER
2. Press MENU to display the Menu, press / / / to select "Setup", and then press ENTER
3. Press
/ / / to select " (Option)" - "Terminal setting", and press ENTER
4. Press / to select "Suitable mode for signals", and press ENTER
5. Press / to select "Full mode (HDR)", and press ENTER
NOTE
• During "Full mode (HDR)" and "Backlight" (page 3-9) can be adjusted respectively for HDR and SDR video
contents.
• HDR and SDR video content signals are identified automatically.
5-7
2020/08/07 Sharp operation manual
To Next Page
Loading...
Need help?
General
