Sharp AE-X127E - SERVICING PROCEDURE (OUTDOOR UNIT); Servicing Steps

AH-X127E
AU-X127E
AY-X127E
AE-X127E
41
SERVICING PROCEDURE
FOR OUTDOOR UNIT MODEL AU-X127E AND AE-X127E
CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE ANY SERVICING
2. Remove the control box cover.
3. Remove two screws which are fixing right side of the
front panel.
And disconnect the wiring from the terminal board.
6. Take off the three hooks of back side of the front panel.
And pull it toward you.
1. Remove one screw which is fixing the control box cover. 4. Remove two screws which are fixing left side of the front
panel.
5. Remove one screw which is fixing front part of the front
panel.
(BLACK COLOR)