Sharp AE-X127J

In this mode, the air conditioner works at maximum power operation. This mode
makes the room cool or warm rapidly.
1 To activate the FULL POWER mode, press
the FULL POWER button during operation.
l FULL POWER mode symbol
played on the remote control.
9 is dis-
l The temperature display disappears.
l This mode will be automatically cancelled
2
after one hour’s operation.
To cancel the FULL POWER mode, press the
FULL POWER button again.
NOTES:
l You cannot use the FULL POWER mode dur-
ing the DRY or the FAN ONLY mode.
l You cannot set the temperature during the
FULL POWER operation.
(The fan speed is adjustable.)
When the ONE-HOUR TIMER is set, the unit will operate for one hour after setting.
1 Press the ONE-HOUR TIMER button.
l “1 H” will be displayed on the remote con-
trol.
l The unit
will operate for one hour.
2
To turn off
the unit within an hour, press the
Atton.
ON/OFF bl
l The red
OPERATION lamp on the indoor
unit will go out.
If you wish to operate the unit for another
hour, press the ONE-HOUR TIMER button
again during operation.
)
NOTE:
l The ONE-HOUR TIMER operation has priority
over other timer operations, such as TIMER ON
and TIMER OFF.
11