1
5
2
CLEAR
3
Selected disc number
Cl
Selected track number Playback order
“cl’
indicator
I
APMS
(Automatic Programmable Music Selector)
You can play back the tracks on the CDs in the disc
1
-
3
positions in any order desired. By specifying the disc numbers
from 1 to 3, and the track numbers from 1 to 99, you can choose
up to 32 selections for playback in the order you like.
1
When in the stop mode, use the disc number buttons
(
@I
I
-
@I
3) to select the desired disc number.
2
Press the
H1
or
w
button to select the desired track.
3
Press the MEMORY/SET (MEMORY) button.
0
“MEMORY” will appear to show that the programmed se-
quence is being entered into memory.
4
Repeat steps 1
-
3 for any other track. Up to 32 tracks can
be programmed.
5
Press the
)
/c
button to start playback of programmed se-
lections.
To clear the programmed selections:
(Remote control operation)
Press the CLEAR button whilst the disc is stopped.
0
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed.
Notes:
Opening the disc tray automatically cancels the programmed
sequence.
Even if you set the ON/STAND-BY switch to STAND-BY or
the function is changed from CD to some other function, the
programmed selections will not be cleared.
During APMS operation, random play is not possible.
n
Repeat play
All tracks on up to 3 discs, or a programmed sequence can be
continuously repeated.
Z
To repeat all tracks on up to 3 discs:
Press the
F
/c
button and press it again.
0
“c”
will appear.
To repeat a programmed sequence:
1
Programme a sequence of up to 32 tracks.
2
Press the
)
/c
button and press it again.
0
“cl’
will appear.
To cancel repeat play:
Press the
)
/c
button again.
0
“c”
will go out.
Note:
l
When using repeat play, be sure to press the
H
(CD
i)
but-
ton, or switch off the power when you have finished listening.
Otherwise, the CD(s) will play endlessly.
IO
-
To Next Page
Loading...