ENGLISH
ON/OFF
button
TIPS ON SAVING ENERGY
Use this mode when the remote con-
trol is not available.
TO TURN ON
Press the ON/OFF button.
) will light up
and the unit will start operating in the AUTO
mode.
set to AUTO.
TO TURN OFF
Press the ON/OFF button again.
) will turn off.
Pairing the mobile device with the
air conditioner by wireless LAN,
you can operate the air conditioner
and monitor the condition of the air
conditioner by the mobile device.
Please refer to the "wireless LAN
guidebook" to get more information
about the wireless LAN pairing.
MANUAL ON/OFF ON UNIT
SMART NETWORK FUNCTION
Below are some simple ways to
save energy when you use your air
conditioner.
SET THE PROPER TEMPERATURE
temperature point will result in increased
power consumption.
BLOCK DIRECT SUNLIGHT AND PREVENT
DRAFTS
operation will reduce power consumption.
and heating operations.
SET PROPER AIR FLOW DIRECTION TO
OBTAIN THE BEST AIR CIRCULATION
KEEP FILTER CLEAN TO ENSURE THE MOST
EFFICIENT OPERATION
MAKE MOST OF THE TIMER OFF FUNCTION
TURN OFF THE CIRCUIT BREAKER WHEN
THE UNIT IS NOT USED FOR AN EXTENDED
PERIOD OF TIME
power when it is not operating.
The green
WLAN
indicator
will light up when the
wireless
LAN
pairing succeed.
NOTE:
select COOL or HEAT mode by comparing
the room temperature and your desired
temperature.
OM-B142 ZU A5 EN.indd 13 2022/7/22 10:59:17
To Next Page
Loading...
Need help?
General
