EN-15
ENGLISH
TO CANCEL THIS FUNCTION
1
Press the PLASMACLUSTER
button.
”.
) will turn
from blue to green.
NOTE:
be memorized, and it will be activated the next
time you turn on the unit.
operation in fan only mode, press the
PLASMACLUSTER button while the unit is
not operating. The mode symbol of the remote
control will go off and the fan speed can not
be set AUTO.
For more information, please visit:
http://www.sharp-world.com/pci/en
1
1
HORIZONTAL AIR FLOW DIRECTION
1
Press the LOUVER button( )
to
.
VERTICAL AIR FLOW DIRECTION
1
Press the
LOUVER b
utton ( )
to set
.
(COOL mode)
(HEAT mode)
CAUTION:
Never attempt to adjust the louvers manually.
the unit to malfunction.
at the lowest position in the COOL mode for
an extended period of time, condensation may
result.
the louver lever.
ADJUSTING THE AIRFLOW
DIRECTION
PLASMACLUSTER OPERATION
1
PLASMACLUSTER function is
ON by default when the unit is in
operation.
1
Louver lever
Plasmacluster ions will be released
into the room.
OM-B142 ZU A5 EN.indd 15 2022/7/22 10:59:19
To Next Page
Loading...
Need help?
General
