Sharp AE-X26FR-N - Page 44

AYXP26FRN
5 – 3
15)Remove the Display PWB.
16)Remove the control box retaining screw.
17)Disconnect the connectors ([fan motor / cluster / louver motor] x 2,
rimit switch).
18)Remove the thermistor.
19)Remove the control box .
20)Remove the dew cover.
21)Remove the side panel L and drain pan retaining screws (3).
22)Remove the screw cover of the drain pan.
23)Remove the drain pan retaining screws (3).
24)Remove the cluster holder retaining screws (3).