E-6
BASIC OPERATION
(Example: 1°C higher)
(Example: 2°C lower)
TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting
and mode are automatically selected ac-
cording to the room temperature when the
unit is turned on.
Modes and Temperature Settings
Room temp.
at operation
start-up
2
5
3
1
4
C
C
1
Press the MODE button to select the
operation mode.
AUTO COOL DRY
2
Press the ON/OFF button to start
operation.
• The red OPERATION lamp ( ) on the unit
will light.
3
Press the THERMOSTAT button to set
the desired temperature.
AUTO/DRY MODE
• The temperature can be changed in 1°C in-
crements within the range of 2°C higher to 2
°C lower from the temperature automatically
determined by the air conditioner.
COOL MODE
• The temperature can be set within the
range of 18°C to 32°C.
4
Press the FAN button to set the desired
fan speed.
AUTO SOFT LOW HIGH
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
5
To turn off the unit, press the ON/OFF
button again.
• The red OPERATION lamp ( ) on the unit
will turn off.
Automatic Operation
Mode Temperature Setting
Below 24˚C
DRY
Room Temp. at start-up
24˚C-26˚C
COOL
24˚C
26˚C-28˚C
COOL
25˚C
Above 28˚C
COOL
26˚C
To Next Page
Loading...
Need help?
General
