EN-9
The air conditioner works at the
maximum power and optimum louver
direction to make the room cool rapidly.
1
During operation, press the
POWERFUL JET button.
• The remote control will display " ".
• The temperature display will go off.
• The vertical airow louver will be
set obliquely downward.
TO CANCEL
Press the POWERFUL JET button
again.
• The vertical airow louver will re-
turn to the original direction.
NOTE:
• Use of the PLASMACLUSTER operation
will be memorized, and it will be acti-
vated the next time you turn on the unit.
• To perform PLASMACLUSTER operation
in FAN only mode, press the PLASMA-
CLUSTER button when the unit is not
operating.
The mode symbol of the remote control
will go off and the fan speed cannot be
set to AUTO.
Plasmacluster ions released into the
room will reduce some airborne mold.
1
During operation, press the PLAS-
MACLUSTER button.
• The remote control will display
"
"
.
• The
OPERATION lamp ( ) will
turn from green to blue.
TO CANCEL
Press the PLASMACLUSTER but-
ton again.
• The
OPERATION lamp ( ) will
turn from blue to green.
1
1
NOTE:
• The air conditioner will operate at
"Extra cooling power" and "Extra
HIGH" fan speed for 15 minutes,
then shift to "HIGH" fan speed.
• You can not set the temperature or
fan speed during the POWERFUL
JET operation.
• POWERFUL JET operation is not
available in FAN mode.
POWERFUL JET OPERATION
PLASMACLUSTER
OPERATION
“OM TINSEB052JBRZ EN+CS+TH”文件夹.indb 9 2018/10/19 15:27:25
To Next Page
Loading...
Need help?
General
