Sharp AH-XP Series - ABOUT ERROR CODE; GET THE ERROR CODE

ENGLISH
EN-16
BEFORE CALLING FOR SERVICE
3
Press the FAN button once, the
remote control will display " ".
4
Press the THERMOSTAT button
" " and " ", remote con-
trol display will change from "
" to " " step by step. Mean-
while, buzzer makes a short
beep sound on every step.
• When it displays " ", the buzzer
will make a long beep sound to
remind you this error code " " is
sub error code.
ABOUT ERROR CODE
• The error code contains main code
and sub code.
Example
: error 23-4.
ERROR CODE
Main
Code
Sub
Code
GET THE ERROR CODE
Example
: error 23-4.
1
Press the THERMOSTAT button
" " for over 5 seconds on
remote control when the indoor
unit and remote control is off.
• The remote control will display
" " and there will be a beep
sound from the unit’s buzzer.
2
Press the THERMOSTAT button
" " and " ", remote con-
trol display will change from "
" to " " step by step. Mean-
while, buzzer makes a short
beep sound on every step.
• When it displays
" "
, the buzzer will
make a long beep sound to remind you
this error code
" "
is main error code.
1
4
2
3
“OM TINSEB052JBRZ EN+CS+TH”文件夹.indb 16 2018/10/19 15:27:31