Sharp AL-2035

AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 10
14) Remove the pulleys on the both sides and remove the paper
exit roller. (AL-2020/2035/2040)
15) Disengage the pawl, and remove the roller knob.
16) Disengage the pawl, and shift the pulley and the bearing.
17) Remove the paper exit roller, and remove the belt, the pulley,
and the bearing.
18) Remove the harness guide.
19) Remove two screws and remove the toner motor.
20) Remove three screws, and remove the DUP motor unit and the
belt.
4)
2)
1)
3)
1)
2)
3)
4)
1)
2)
1)
2)
1)
1)
2)
3)