30
4
Chapter 4
AUTOMATIC TWO-SIDED COPYING
Two originals can be automatically copied onto both sides of a single sheet of paper.
When the RSPF is used, two-sided copies of two-sided originals can easily be made.
When performing automatic two-sided copying of one-sided originals, the orientation
of the copied image can be selected according to the binding position of the paper.
SHORT EDGE: Select when binding the paper at the short edge.
LONG EDGE: Select when binding the paper at the long edge.
Original → Paper Usable paper
Document
glass
One-sided original → Two sides
5-1/2" x 8-1/2", 8-1/2" x
11", 8-1/2" x 13",
8-1/2" x 14"
• The bypass tray
cannot be used.
RSPF
One-sided
original →
Two sides
Two-sided
original →
One side
Two-sided
original →
Two sides
5-1/2" x 8-1/2", 8-1/2" x
11", 8-1/2" x 13",
8-1/2" x 14"
• Special paper cannot
be used.
• The bypass tray can
only be used when
making one-sided
copies from two-
sided originals.
(Paper orientation: Landscape) (Paper orientation: Portrait)
(Paper orientation: Landscape) (Paper orientation: Portrait)
AB
A
B
A
B
AB
CONVENIENT COPY
FUNCTIONS
!AL-2050CS.book 30 ページ ２００８年１月７日 月曜日 午後８時１０分
To Next Page
Loading...
