Sharp AN-52AG1 - Main Bracket Unit

E-6
+5
-5
0
0
+5
-5
The wall-mount bracket allows the height of the LCD television to be
changed between the 3 settings of 0 cm (standard), +5 cm, and -5 cm.
The standard position (television screen center) is when the top-most
pin of the main bracket unit is in the second groove from the top of the
based bracket (shown by a yellow “0”). (See illustration below.)
(The alignment line that marks the wall mount bracket television screen
center is also in the 0 cm (standard) position.)
Height marks on the side of the based bracket
(Green)
(Yellow)
(Blue)
Wall side TV set side