EasyManuals Logo

Sharp AQUOS 4P-B55EJ2U User Manual

Sharp AQUOS 4P-B55EJ2U
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
[ENGLISH]
Contents
1.
Part Names
2.
Introduction
3.
Direct Button Operation
4.
On
-Screen Display Menu
5.
Application
1.
MMP (Multi Media Player)
2.
Casting
3.
OPEN BROWSER
6.
Using a PC
7.
Using the touch function
8.
Appendix
9.
Specifications
10.
Trademarks
11.
Dimensional Drawings
>>
<<
Ver. 1.1
NOTE
This TV has a built-in wireless LAN function. Using a separate
wireless USB LAN adapter may result in radio communications that
do not comply with regulations on radio communications. Therefore,
do not use a separate wireless LAN.
A wireless LAN connection and performance cannot be guaranteed
for all residential environments. In the following cases, the wireless
LAN signal may be poor or drop, or the connection speed may
become slower.
- When used in buildings made with concrete, reinforced steel, or
metal.
- When placed near objects that obstruct the signal.
- When used with other wireless devices that emit the same
frequency.
- When used in the vicinity of microwave ovens and other devices
that emit a magnetic field, electrostatic charge, or electromagnetic
interference.
Network Settings
To connect your TV to the Internet, you must have a broadband
Internet connection.
If you do not have a broadband Internet connection, consult the
store where you purchased your TV or ask your Internet service
provider or telephone company.
When an Internet connection is made, an Ethernet and wireless
connection cannot be used at the same time. Use only one of the
connection types.
By connecting your TV to a broadband system, you can access the
Internet from the TV.
Using an ETHERNET cable
Use an ETHERNET cable (commercially available) to connect
the ETHERNET terminal on the TV to your broadband router
(commercially available).
Using the wireless LAN
This TV is equipped with a wireless LAN function.
For a wireless LAN connection, you must use "Wireless Setup"
to connect the access point and TV.
Perform the procedure below to make adjustments or to confirm the
settings for accessing the Internet.
1. Press MENU to display the MENU screen, and then press
ENTER.
2. Press / to select "Network Setting", and then press
ENTER.
3. Press / to select "Connection Type", and then press
ENTER.
Press / select "Wired" or "Wireless". and press ENTER.
4. Press / to select "Wired Setup", or "Wireless Setup", and
then press ENTER.
Select ”Wired Setup" when you make general adjustments to
connect to the Internet.
5. Press MENU to exit.
Connecting to the Internet
en-US 48
Application (Using the Internet)
OPEN BROWSER

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp AQUOS 4P-B55EJ2U and is the answer not in the manual?

Sharp AQUOS 4P-B55EJ2U Specifications

General IconGeneral
Screen shapeFlat
LED backlightYes
Response time6 ms
Display diagonal55 \
Display brightness300 cd/m²
Display technologyLCD
Native aspect ratio16:9
Native refresh rate60 Hz
LED backlighting typeDirect-lit LED
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p
Contrast ratio (typical)1300:1
Display number of colors1.07 billion colors
Supported graphics resolutions640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1360 x 768 (WXGA), 1400 x 1050 (SXGA+), 1920 x 1080 (HD 1080), 3860 x 2160
Motion interpolation technology-
Tuner typeAnalog & digital
Analog signal format systemNTSC
Digital signal format systemATSC
RMS rated power16 W
Number of speakers2
Stand typeLegs stand
Product colorBlack
High Dynamic Range (HDR) technologyHigh Dynamic Range 10 (HDR10)
HDMI ports quantity3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Control typeWireless
Power consumption (standby)- W
Power consumption (typical)130 W
Operating temperature (T-T)0 - 40 °C
Package typeBox
Package depth123.95 mm
Package width1346.2 mm
Package height805.94 mm
Package weight15998 g
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)73.66 mm
Width (with stand)1227 mm
Height (with stand)711.2 mm
Height (without stand)710 mm
Weight (without stand)12800 g

Related product manuals