Connecting to External Equipment
You can connect many types of external equipment to your TV. To view external source images, select the input
source from INPUT on the remote control unit
or
on the TV. (See page
13.)
For connecting the
TV
to external equipment, use commercially available cables.
lU!!im
•
To
protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting a Blu-ray DisC/DVD Player
or
HD Cable/Satellite Set-top Box
• When using HOMI cable (INPUT
3):
The HDMI (High Definition Multimedia Interface) terminal
is
an audio-video interface that enables a connection for audio and
video signals using a single cable. The HDMI terminal supports high-resolution video input.
• Blu-ray disc player • DVD player
• HD cable/satellite set-top box
Rear of the TV
[]CE
HDMI-certified cable
RIm
• Supported Audio format: Linear PCM (sampling rate 32/44.1 /48kHz) and Dolby Digital.
• Digital Audio output is not available when using an
HDMllnput.
• When using OVI-HDMI conversion cable (INPUT 3):
• Blu-ray disc player • DVD player
• HD cable/satellite set-top box
o3.5 mm stereo minijack cable
Rear of the TV
";~~u%~iirt1i'
ff---=-=--lij~lt~f[i"jrJJL~
5'~
:T['
~::,,:~r
~
I
DVI-HDMI conversion cable
@)-14
RIm
• When using an DVI-HDMI conversion cable, you should make an analog audio connection.
In
this case,
in
addition to
connecting an DVI-HDMI conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI
terminal and set "HDMI Audio" to "DVI". (See page 26.)
To Next Page
Loading...
