QUICK REFERENCE
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
3 Close the battery cover.
2 Insert two "AAA" size batteries
(supplied with the product).
• Place the batteries with their terminals
corresponding to the (+) and
(-)
indications
in
the battery compartment.
1 Open the battery cover.
B!m
Improper use of batteries can result
in
chemical leakage
or
explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life
of
new batteries or cause chemical
leakage
in
old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
Remote control
sensor
IMPORTANT:
The POWER indicator on the television should light GREEN indicating you have power to the TV.
If the POWER indicator on the television still does not light up, press
POWER on the remote control to turn the
power on.
® ®
®®
IMPORTANT:
IFTHE
UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US
AT
1-800-BE-SHARP.
@-a
To Next Page
Loading...
