15
AV2
COMPONE N T
CARD
AV1
12
BASIC OPERATION (Continued)
1 Press MAIN POWER, located on
the upper side of the main unit, to
on.
2 The POWER indicator instantane-
ously changes from red to green
and the main unit is turned on.
▼ On-screen display
2
STEREO
<
ON A I R
SAP
M
ONO
Turning on POWER
Notes:
Switching TV/VIDEO [AV1/AV2/COMPONENT/CARD/TV] Modes
● The input mode indication disappears
after several seconds.
AV1 mode
AV2 mode
TV mode
1 Turn on the power of the connected
video equipment.
2 Press TV/VIDEO and select the
applicable input source. The screen
displays AV1, AV2, COMPONENT,
CARD or TV mode each time TV/
VIDEO is pressed.
● The AV input mode indication remains
for 3 seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
An S-Video input terminal is
additionally provided for the AV1
input. If both the S-Video terminal
and normal video terminals are
connected with cables, the S-
Video input terminal takes priority.
• AV2: AV2 mode is used to adjust the
preset settings and IN or OUT can
be selected. AV2 indication is not
displayed when OUT is selected.
(For details on setting AV-OUT,
see page 24.)
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
• CARD:
Switches to CARD mode.
(For details on CARD mode, see
pages 36-47.)
1
4
7
MTS
2
5
8
0
3
6
9
100
POWER
DISPLAY
SLEEP CARD
ENTER
CHVOL
FLASHBACK
MUTE BRIGHT MENU TV/VIDEO
MAIN POWER
POWER indicator
COMPONENT mode
POWER
TV/VIDEO
CARD mode
Note
Note
LC-20B1U-GBpp01-18 02.2.21, 4:44 PM15
To Next Page
Loading...
