Sharp Aquos LC 20B1U - Preset System Settings

24
1 Press MENU to display the MENU
screen.
2 Press ]/[ to move the cursor to
PRESET, and press ENTER.
ADJUSTMENT (Continued)
Adjusting the PRESET Settings
Selected item Factory setting Setting change
BRIGHTNESS [BRIGHT] Maximum brightness [NORMAL] Brightness 60% → Suitable for viewing in a well-lit area.
Saves energy.
[DARK] Brightness 20%
→ Sufficiently bright when
viewing in a dimly lit area.
AUTO POWER OFF [OFF] [ON] The power of the LCD TV set is turned off when there is
(only TV mode) no signal for 5 minutes.
[OFF] This feature is inactive.
UPSIDE [NORMAL] Normal vertical [DOWN] Inverted image → To display images
image orientation upside down for special uses.
RIGHT/LEFT [NORMAL] Normal horizontal [MIRROR] Mirror image → To display mirror
image orientation images for special uses.
AV2 IN/OUT [IN] [OUT ] Line Output is selected, Output volume is fixed, Speaker
output is available.
[OUT
] Line Output is selected, Output volume is variable,
Speaker output is Mute.
ABC
3 Press ]/[ to move the cursor to
the desired item, and press
ENTER.
ABC
1
4
7
MTS
2
5
8
0
3
6
9
100
POWER
DISPLAY
SLEEP CARD
ENTER
CHVOL
FLASHBACK
MUTE BRIGHT MENU TV/VIDEO
ENTER/
]/[/
</ >
M ENU
SLEEP T I M ER
V IDEO ADJUST
PRESET
CLOSED CAPT ION
V–CHI P BLOCK
SET UP
BRI GHTNESS [BRIGHT ]
AUTO PO
W ER OFF
UPS I DE
RIGHT/LEFT
AV2 IN/OUT
SELECT :
RETURN
[OFF ]
[NOR
M AL ]
[NOR
M AL ]
[IN ]
PRESET
ENTER:
MENUENTER
EXIT:
BRI GHTNESS [BRIGHT ]
AUTO PO
W ER OFF
UPS I DE
RIGHT/LEFT
AV2 IN/OUT
RETURN
[OFF ]
[NOR
M AL ]
[NOR
M AL ]
[IN ]
PRESET
ENTER:
MENUENTER
EXIT:ADJUST:
MENU
4 Press </ > to change the setting,
and press ENTER.
5 Press MENU to return to the main
screen.
● When OUT has been selected as the AV2 IN/OUT setting, it is not possible to set AV2 to ON in SOUND SETTING
for CARD mode. In order to set AV2 to ON, select IN as the AV2 IN/OUT setting.
Note
LC-20B1U-GBpp19-35 02.2.21, 4:42 PM24