Sharp Aquos LC 20B1U - Changing V-Chip Block Settings

35
[5] CHANGING THE V-CHIP BLOCK SETTINGS
Adjusting the V-CHIP Settings (Continued)
1 Repeat steps 1 to 3 of [1] MPAA
RATING, then INPUT SECRET
NO. will be displayed.
2 Input the 4-digit secret number by
using the channel select keys; the
V-CHIP select mode will be
displayed. Set V-CHIP BLOCK
again.
[6] CHANGING OR CLEARING THE SECRET NUMBER
1 Repeat steps 1 to 3 of [1] MPAA
RATING, or 1 to 2 of [4]
CANCELING THE V-CHIP
BLOCK SCREEN WHILE V-CHIP
BLOCK IS ACTIVATED, then
INPUT SECRET NO. will be
displayed.
2 Press and hold both CH ( ) and
VOL (+) on the TV set simultane-
ously until the message INPUT
SECRET NO. blinks.
3 Press MENU to exit.
ADJUSTMENT (Continued)
1
4
7
MTS
2
5
8
0
3
6
9
100
POWER
DISPLAY
SLEEP CARD
ENTER
CHVOL
FLASHBACK
MUTE BRIGHT MENU TV/VIDEO
INPUT SECRET NO.
– – – –
MENU
EXIT:
INPUT SECRET NO.
* * * *
MENU
EXIT:
Channel
Select
If you forget the secret number, clear the secret number as follows.
VOL
CH MENU
Upper control panel
of the main unit
VOL (+)
CH ( )
MENU
LC-20B1U-GBpp19-35 02.2.21, 4:43 PM35