Sharp Aquos LC 20S4U - Connecting a VCR, DVD Player or a Camcorder to INPUT1;INPUT2;INPUT3

36
Connecting External Devices (Continued)
ANote:
• If your VCR (or other external devices) has an S-video terminal, S-VIDEO connection is recommended. (Use an S-video cable.)
• When you connect external devices to both S-VIDEO and VIDEO terminals (and if you select “INPUT2”), you can only view pictures from
the S-VIDEO terminal.
• You cannot view multiple or synthesized pictures by connecting two or more external devices. When connecting an external device, use
care to connect the video and audio cables to the corresponding terminals.
• Only when 480I, 480P or 576I signal is received, picture can be displayed.
Connecting a VCR, DVD Player or a Camcorder to INPUT1/INPUT2/INPUT 3
VCR
VCR
DVD Player
Camcorder
Video
Audio (L)
Audio (R)
Y
P
B
PR
Audio (L)
Audio (R)
Video
Audio (L)
Audio (R)
S-Video
Component cable
(commercially available)
Audio cable
(commercially available)
S-Video cable
(commercially available)
Audio/Video cable
(commercially available)
Audio/Video cable
(commercially available)
LC-20S4U_E_P35-40.p65 04.12.8, 7:23 PM36