12
* Press RESET if the TV cannot return to its original state after performing various operations.
This will reset the TV as shown below.
• “AV MODE” resets to “USER”.
• TV channel resets to channel 1.
• Sound volume is initialised.
• Image position is initialised.
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and password. See page 30 for resetting the password. See page 47 for
initialising to the factory preset values in case you forget your password.
• Still image mode deactivates.
• Teletext mode resets to normal.
• “Audio Only” setting resets to “Off”.
• “Rotate” resets to “Normal”.
Part names
TV (Rear)
RESET*
INPUT 2 terminals
Antenna input terminal
SYSTEM RESET**
INPUT 3 terminals
INPUT 1 terminals
INPUT 4 (HDMI)
terminals
Headphone jack
AV OUTPUT terminals
AC INPUT terminal
LC-AX3X(E)-a 05.11.18, 0:53 PM12
To Next Page
Loading...
